Tel: +86-21-36360933 36360955 36361733 36361755
Suite 15G,YongRong Enterprise Center,No.1111 Liyang Road,HongKou Area,Shanghai,200081,China.

seamless tube manufacturers

Seamless tube is a hollow section with no joints around the strip steel.

Manufacturer methods of seamless tube
According to the production methods,it can be divided into hot tube, cold rolling, cold drawing tube, pipe extrusion etc..
1)Hot rolled seamless pipe in general is produced on the automatic pipe rolling mill. After checking and clearing the surface defects of solid tube embryo, cut into required length, center on the perforation end and then sent to a heating furnace, in punch. Continue to rotate and advance when perforating, in the roll and immediate action, tube gradually form a cavity, called capillary. Sent to the automatic tube rolling machine to continue rolling. Finally, reeling the wall thickness and sizing by machines to meet requirement of specification .Production of continuous rolling mill of seamless tube is a more advanced method.

2)In order to obtain smaller size and better quality of seamless tube,better adopt cold rolling, cold drawing or combined. Cold rolling is usually carried out on the two roll mill while cold drawing was usually in the 0.5 ~ 100T single chain or double chain drawbench.
3)Extrusion method refers to putting the heated tube embryo in a closed extrusion cylinder, the perforated bar and extrusion rod move together, so that the extruding part is extruded from the smaller die hole. This method can produce smaller diameter steel tube.

Type of seamless tube:
1)According to the production methods :hot tube, cold drawn tube, pipe, pipe extrusion etc.
2)According to the shape :round pipe, shaped pipe
3)According to the materials:ordinary carbon structure, low alloy structure, quality carbon structure, alloy pipe, stainless steel pipe, etc.
4)According to the special purpose:boiler tube, geological pipe, oil pipe, etc.

Application of seamless tube
1)Steel pipe with hollow section, a large number of pipelines used to transport fluid, such as the transmission of oil, natural gas, coal gas, water and some solid materials, such as pipelines, etc.
2)Widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and construction of steel scaffolding, etc.
3)Manufacture of ring parts,Such as rolling bearing ring, Jack and so on, has been widely used in steel pipe manufacturing

Jawaysteel is the professional seamless tube manufacturer since 1998.Should contact us freely if any question. Email:809@jawaysteel.com Website:www.jawaygroup.com

Get in Touch

vacuum furnace vacuum pump,vacuum furnaces,vacuum coating machine

Copyright © 1998-2016 Jaway Stainless Steel. All rights reserved.